LogoHOIST
Overhead view from operator catwalk looking down a 300-foot factory bay with twin bridge cranes on parallel rails, pendant controls hanging mid-frame, sodium lights catching yellow paint on end trucks
Bay 7 — Production Floor
Industrial Lifting Systems

Engineeredto BearIt.

Bridge cranes, jib cranes, electric hoists, and runway systems engineered for continuous-duty industrial environments — from 0.25 tons to 100-ton custom configurations.

Get Your Load StudyDownload Full Catalog
100T
Max Capacity
37yrs
In Production
H4/H5
Duty Class
Bridge Cranes•Jib Cranes•Electric Hoists•Runway Systems•End Trucks•Festoon Systems•ASME B30.2•CMAA Class D/E•OSHA 1910.179•0.25T – 100T•Bridge Cranes•Jib Cranes•Electric Hoists•Runway Systems•End Trucks•Festoon Systems•ASME B30.2•CMAA Class D/E•OSHA 1910.179•0.25T – 100T•
Heavy-duty overhead bridge crane spanning a wide industrial bay with yellow-painted end trucks on parallel runway rails and pendant control hanging mid-frame
CMAA Class D/E
— Bridge Cranes

Overhead Bridge Cranes for Heavy-Cycle Production

Single-girder and double-girder configurations for automotive press lines, foundry ladle transfers, and shipyard hull section lifts. Full CMAA Class C–E ratings, pendant or radio control.

Capacity Range5T – 100T
Span20 ft – 120 ft
Lift HeightUp to 60 ft standard
Duty ClassificationCMAA Class C / D / E
Hoist Speed2 – 30 FPM (variable)
Bridge SpeedUp to 200 FPM
Power Supply460V / 3Ø / 60Hz std.
End Truck ConfigBox-girder or I-beam
Get Your Load StudyDownload Full Catalog PDF →
4,200+
Installations since 1987
Across automotive, steel processing, shipyard, and aerospace facilities in 38 states.
— Jib Cranes

Workstation Jib Cranes for Precision Assembly

Floor-mounted, wall-mounted, and mast-style jib cranes for welding stations, CNC load/unload, and parts transfer. 360° rotation, manual or motorized trolley, up to 15 tons.

Capacity Range0.25T – 15T
Boom Reach8 ft – 30 ft
Rotation180° / 360° mast
Duty ClassificationCMAA Class B / C
Lift HeightUp to 20 ft under hook
MountingFloor / wall / ceiling
Power Supply208–480V / 1Ø or 3Ø
Trolley TypeManual or motorized
Get Your Load StudyDownload Full Catalog PDF →
Floor-mounted jib crane at a welding workstation in a fabrication shop, boom extended with chain hoist attached, steel parts staged below
CMAA Class B/C
48 hrs
Load study turnaround
Submit span, capacity, and duty cycle — our engineers return a full configuration spec.
Electric wire rope hoist mounted on I-beam monorail in a heavy manufacturing plant, hook block visible with wire rope reeved through lower block
FEM M5 / H3
— Electric Wire Rope Hoists

Wire Rope Hoists Rated for Continuous Duty

FEM/ASME M4–M6 rated wire rope hoists for replacement or new-installation. Dual-speed motors, variable frequency drives, and load-limiting protection standard on Class H3 and above.

Capacity Range0.5T – 50T
Lift Height15 ft – 100 ft standard
FEM / ASME ClassM4 / M5 / M6 (H2–H4)
Hoist Speed8 / 16 FPM dual-speed
Rope Reeving2-part to 8-part
Hook ApproachMinimum per ASME B30.16
Motor ClassS3 40% / S3 25% duty
Power Supply230–575V / 3Ø
Get Your Load StudyDownload Full Catalog PDF →
99.4%
Uptime across fleet — rolling 12-month
Field data from 280 monitored installations with predictive maintenance reporting.
— Runway Systems

Engineered Runway Systems for Full-Bay Coverage

Complete crane runway packages — structural steel, ASCE rail, festoon, conductor bar, and end stops — engineered to CMAA Spec 70/74 and site-specific seismic requirements. New construction or retrofit.

Rail ProfileASCE 25 – 175 lb/yd
Bay LengthUp to 600 ft continuous
Column Spacing15 ft – 40 ft on center
Runway ClassAISC / CMAA Spec 70/74
End-Stop TypeBolted bumper or hydraulic
Festoon SystemC-track or cable carrier
Conductor BarEnclosed / insulated 4-wire
Seismic RatingIBC Zone 0–4 available
Get Your Load StudyDownload Full Catalog PDF →
Wide-angle view of a crane runway system inside a large industrial facility showing parallel rail girders, column brackets, and festoon cable carrier running the full bay length
CMAA Spec 70/74
Free Engineering Service

Start With a Load Study.

Tell us your span, capacity, and duty cycle. Our engineers return a complete configuration spec — bridge crane or hoist — within 48 hours. No obligation.

Download Full Catalog PDF

NEMA / IEC rated · CMAA Class A–F · OSHA 1910.179 compliant